This listing has been expired.
800mm wide x 2000mm high
Relatively easy to assemble
Takes one person 10 minutes
Base requires filling with 15 litres of water
600mm wide - 17kg
Our most weather resistant outdoor banner
1 x Typhoon base unit
2 x Pole sets
2 x Hangers
1 x Carry bag
1 x Graphic (or 2 if dual sided)
Graphic can be replaced
Can be used outdoors
Wind resistant with weighted base
Graphics can be double sided
1000 x 1200mm
1000 x 1500mm
1000 x 2000mm
Self assembly
Instructions will be provided
Takes one person 10 minutes
1000 x 1200mm - 1.5kg
1000 x 1500mm - 1.9kg
1000 x 2000mm - 2.5kg
For indoor or temporary outdoor use
2 x Posts
1 x Cross Bar
2 x Spring Fittings
Light and easily transported
Cost effective solution
More premium look
1000 x 1200mm
1000 x 1500mm
1000 x 2000mm
Self assembly
Instructions will be provided
Takes one person 10 minutes
1000 x 1200mm - 1.0kg
1000 x 1500mm - 1.2kg
1000 x 2000mm - 1.5kg
For indoor or temporary outdoor use
2 x Posts
1 x Cross Bar
2 x Spring Fittings
Light and easily transported
Cost effective solution
A4 – 297 x 210mm
A3 – 420 x 297mm
Self assembly
Instructions will be provided
Takes one person 5 minutes
A4 – 2kg
A3 – 3kg
For indoor use only
1 x Sign
1 x Stand
Light and easily transported
Cost effective
A1 – 841 x 594mm
A0 – 1189 x 841mm
Max - 1524 x 1016mm
Self assembly
Instructions will be provided
Takes one person 15-20 minutes
Base requires filling with water
A1 – 20kg (emptied of water)
A0 – 29kg (emptied of water)
Max – 43kg (emptied of water)
For outdoor use
Wind resistant
Our heaviest and most durable forecourt sign
1 x Aluminium Panel
1 x Frame
1 x Plastic base
1 x Filler cap
2 x Panel hanging clips
Graphics.
Graphic can be replaced
Suitable for outdoor use
Graphics can be displayed both sides
Base can be filled with water for wind resistance
Wheels attached to base for easy movability
A1 – 841 x 594mm
A0 – 1189 x 841mm
Max - 1524 x 1016mm
Self assembly
Instructions will be provided
Takes one person 15-20 minutes
Base requires filling with water
A1 – 6kg (emptied of water)
A0 – 8kg (emptied of water)
Max - 10kg (emptied of water)
For outdoor use
Wind resistant
1 x Plastic base
1 x Steel frame
2 x Wheels
2 x Screws
2 x Washers
2 x Nuts
Graphics provided
Graphic can be replaced
Suitable for outdoor use
Graphics can be displayed both sides
Base can be filled with water for wind resistance
Wheels attached to base for easy movability
1215(h) x 740(w) x 610(d)mm
Self assembly
Instructions will be provided
Takes one person 15-20 minutes
Base requires filling with water
11.5kg (emptied of water)
For outdoor use
Wind resistant
1 x Aluminium Panel
1 x Steel frame
1 x Plastic base
1 x Filler cap
2 x Panel hanging clips
Graphics.
Graphic can be replaced
Suitable for outdoor use
Graphics can be displayed both sides
Base can be filled with water for wind resistance
Wheels attached to base for easy movability
915 (H) x 585 (D) x 475 (D) mm
Self assembly
Instructions will be provided
Takes one person 15-20 minutes
11.8kg
For indoor or temporary outdoor use
1 x Recycled PVC base
1 x Flexible pocket
1 x Steel frame
1 x 4mm allen key
2 x Panel hanging clips
4 x Screws
4 x Saddle washers
4 x Finishing washers
Graphic can be replaced
Suitable for temporary outdoor use
Graphics can be displayed both sides
Available with a white or black frame
A2 – 594 x 420mm
A1 – 841 x 594mm
A0 – 1189 x 841mm
Sign supplied made up
A2 – 5kg
A1 – 6kg
A0 – 7kg
For indoor or temporary outdoor use
1 x Sign already assembled
Includes graphics
Graphic can be replaced
Suitable for temporary outdoor use
Graphics can be displayed both sides
Folds flat for easy storage
790 (H) x 420 (D) x 420 (D) mm
Sign can be supplied already made up
Or supplied boxed for self assembly
If you self assemble, it will take 24 hours for the adhesive pads to cure
6.8kg
For indoor or outdoor use
1 x Recycled PVC base
1 x Aluminum panel
4 x Plastic adhesive wedges
Graphic can be replaced
Suitable for outdoor use
Graphics can be displayed both sides
1100 mm (H) x 2150 mm (W) x 940 mm (D)
Takes one / two people 10-15 minutes
7.0kg
For indoor or outdoor use
2 x Legs (1 left & 1 right)
4 x Poles (2 male & 2 female)
6 x Thumb screws
10 x Bungee cords
4 x Ground pegs
Graphic included
Graphic can be replaced
Sturdy design
Large depth and width for optimum sized graphic
Suitable for outdoor use
Graphics can be displayed both sides
915 (H) x 2150 (W) x 615 (D) mm
915 (H) x 3140 (W) x 615 (D) mm
Takes one / two people 10-15 minutes
2150mm version - 4.2kg
3140mm version - 6.0kg
For indoor or outdoor use
8 x Horizontal bars
2 x End leg set
1 x Centre leg set
6 x Ground pegs
24 x Bungee cords (enough for 2 graphics)
Bag and inner wraps
Graphic can be replaced
Sturdy design
Suitable for outdoor use
Graphics can be displayed both sides
1853mm wide x 2130mm high
2492mm wide x 2130mm high
3073mm wide x 2130mm high
Takes two people 10-15 minutes
1853mm wide - 32kg (wheel case supplied)
2492mm wide - 33kg (wheel case supplied)
3073mm wide - 35kg (wheel case supplied)
For indoor or outdoor use
1 x Black wheeled case
1 x Curved frame
1 x Frame bag
15 x Aluminium mag bars
1 x Mag bar bag
4 x Panel hangers
2 x Panel kickers
1 x Roll magnetic tape
1 x Black lectern conversion wrap
1 x Beech laminate lectern conversion top
All graphics
Graphic can be replaced
Wheeled carry case converts to table
Perfect for exhibitions
Halogen lights, brackets and power leads optional
1853mm wide x 2130mm high
2492mm wide x 2130mm high
3073mm wide x 2130mm high
Takes two people 10-15 minutes
1853mm wide - 32kg (wheel case supplied)
2492mm wide - 33kg (wheel case supplied)
3073mm wide - 35kg (wheel case supplied)
For indoor or outdoor use
1 x Black wheeled case
1 x Curved frame
1 x Frame bag
15 x Aluminium mag bars
1 x Mag bar bag
4 x Panel hangers
2 x Panel kickers
1 x Roll magnetic tape
1 x Black lectern conversion wrap
1 x Beech laminate lectern conversion top
All graphics
Graphic can be replaced
Wheeled carry case converts to table
Perfect for exhibitions
Halogen lights, brackets and power leads optional
A1 – 841 x 594mm
A0 – 1189 x 841mm
Max - 1524 x 1016mm
Self assembly
Instructions will be provided
Takes one person 15-20 minutes
Base requires filling with water
A1 – 6kg (emptied of water)
A0 – 8kg (emptied of water)
Max - 10kg (emptied of water)
For outdoor use
Wind resistant
1 x Plastic base
1 x Steel frame
2 x Wheels
2 x Screws
2 x Washers
2 x Nuts
Graphics provided
Graphic can be replaced
Suitable for outdoor use
Graphics can be displayed both sides
Base can be filled with water for wind resistance
Wheels attached to base for easy movability
600mm wide x 2000mm high
Relatively easy to assemble
Takes one person 10 minutes
Base requires filling with 15 litres of water
600mm wide - 3.6kg
For indoor or outdoor use
1 x Moulded plastic base
1 x Central telescopic pole
4 x Tension rods
1 x Graphic
Graphic can be replaced
Can be used outdoors
Wind resistant with weighted base
Graphics can be double sided
600mm wide x 2120mm high
800mm wide x 2120mm high
1000mm wide x 2120mm high
1200mm wide x 2120mm high
1500mm wide x 2120mm high
Easy to assemble
Takes one person 5-10 minutes
600mm wide - 3.7kg
800mm wide - 4.3kg
1000mm wide - 5.6kg
1200mm - 6.5kg
For indoor use only or dry, still conditions
1 x Sidewinder unit with poles
1 x Graphic hanger
1 x Hook fastener
1 x Hanger support
1 x Padded carry bag
Mechanism can be reused
Graphic hides the base
Graphics can be double sided
Available in wider sizes